HP Deskjet 6843 Color Inkjet Printer - Configuring the printer to feed paper from the accessory

background image

Configuring the printer to feed paper from the accessory

Follow these steps to configure the printer to feed paper from the accessory:

1. Press and hold down the Report Page button.
2. While holding down the Report Page button, press the Cancel button twice.
3. Release the Report Page button.

After configuring the printer to feed paper from the accessory,

load the photo paper

into the accessory

and then follow the

PictBridge printing instructions

.

Note: For printing PictBridge photos, the printer only needs to be configured to

feed paper from the Auto Two-Sided Print Accessory with Small Paper Tray

once. After being configured, the printer will attempt to print from the

accessory until the printer is configured to use the In tray for PictBridge

photos.